MaxPowa V65e
Engineered to last, designed to perform

Designed to last in the toughest environments

The MaxPowa V65e hopper is manufactured from 1.4003 stainless steel, shot blasted with aluminum oxide prior to the application of a strontium based primer followed by a hard wearing top coat. In addition, all grey parts such as the sweepgear, powerpack and subframe are shot blasted and electro-magnetically powder painted in a durable two part epoxy paint finish. This ensures the sweeper continues to look as good as it performs, retaining a high residual value or longer in-service life.

Monitor sweeper performance

The CANbus system monitors sweeper performance and provides daily checks. The display incorporates as standard an audible and visual raised hopper warning, battery capacity, and a water level gauge. In addition data can be downloaded via a USB stick, showing a range of information including average sweeping times.

A full CANbus integrated door mounted control pad allows the operator to safely adjust all the sweep options.

The new MaxPowa V65e is equipped with a radio controlled remote pendant allowing the operator to walk completely around the sweeper without having wires to contend with.

 The operator can adjust the wide sweep brush easily to extend brush life and can check the surroundings before opening the hopper or tipping.

Designed with Safety in mind

The highly visible, self-engaging body prop provides the operator and service personnel with a safe working environment. The V Range features a wireless radio controller allowing the operator to walk completely around the sweeper. The operator can adjust the wide sweep brush easily and check surrounds before opening the rear door or tipping.

High visibility brush plates and hose sleeves make it easier for the operator to see the brush position. The V Range is also supplied with an LED sweepgear work light as standard and a wide range of additional LED and hazard warning lights are also available.

Additionally, the MaxPowa V65e is also fitted with waterproof IP67 automotive electrical connectors for enhanced reliability. MaxPowa V65e models have equipment storage lockers on both sides of the hopper for storage of hydrant or Wanderhose extension tubes. 

Designed with the Operator in mind

The in-cab centre console featuring cup holders and USB charging points can be adjusted to suit the operators preference. The 7” colour JVM screen is mounted on an articulated arm allowing tilt angle and rotation to be adjusted without the need for any tools. The JVM has a wide range of settings that can be tailored to suit the operational needs.

The ergonomic door controller can be used for all sweeping operations, brush position, pressure, speed, nozzle aperture and water jets. A heavy duty pause button allows the operator to lift all the sweepgear until depressed again. This allows the operator to change from sweeping to transit in a quick and easy way. The V Range remembers the last sweeping settings used each time.

Water Purging system as standard

Water purging system so that when freezing weather conditions are anticipated, water is easily and conveniently drained from the sweeper by a simple in-cab switch. Water jets in the nozzle boxes are self-cleaning which extends the life of the components.

Up to 1554 litres

The V Range has a 1554 litre stainless steel water tank integrated in the lower portion of the hopper. The MaxPowa V65e uses yellow mist atomizing jets to reduce water usage by 20%, alternatively red nozzle jets with higher flow are available for heavier applications. 

Up to 3600mm with simultaneous sweep option

The MaxPowa V65e offers up to 3600mm swept width with the simultaneous sweep option (for dual sweep machines only), set almost flat makes short work of light application surface cleaning.