One

Spreader for medium trucks

Available in container sizes from 2.2 m³ up to 5.0 m³.

Bucher One metal belt spreader for light trucks, suitable for salt, sand or grit. The hopper, fully welded to prevent vibrations, is made in AISI 304 stainless steel, providing load capacity without any deformation.

Get to know the One spreader

Technology

Modern technology and feeding system

Metal belt: The feeding system is realized by an AISI 304 stainless steel chain with cross-bars. The chain is guided by toothed pinions that enables a constant traction maintaining a correct translation synchrony, without skidding.

Auger: The feeding system is realized by an auger with variable pitch turn. The bottom of the feeding system is realized by an anti-abrasive rubber to enable the passage of bigger lumps avoiding the auger blockage.

Reliability

Reliable and performant spreaders

The gritting machines of the One range are renowned for their excellent reliability, first-class service and attractive price-performance ratio. The excellent equipment finish and the use of tried-and-tested components are further proof of the great technical expertise built into our machines.

Performance

High quality and long lifetime

The high proportion of stainless steel ensures even the basic amenities for a long lifetime of the spreaders (Skid plates, spreader disc, feet sockets and all fasteners are in stainless steel). The device security cover is also made of stainless material.

Key specifications

Large choice of container sizes
Low container profile
Low container centre of gravity
Very short overhang of spreader unit
Standard-compliant spreading precision test
Special paintwork and many stainless steel components

Key features

Metal belt feeding system

Roller breaker

Standard Spreading system

Hydraulic Driving systems

Auxiliary engine Driving systems

Salt missing sensor

Automatic demount system

Pre-wetting system

Metal belt feeding system

The feeding system is realized by metal belt an AISI 304 stainless steel with cross-bars. The chain is guided by toothed pinions that enable a constant traction, maintaining a correct translation synchrony, without skidding.

Roller breaker

The roller breaker enables a continuous material flow from the hopper to the spreading unit, breaking the salt lumps and thereby avoiding an uncontrolled drop. At the exit side of the chain or rubber belt feeding system, a hydraulically driven, transversal counter-rotating roller breaker with stainless steel blades is installed.

Standard Spreading system

The chute is realized in polyethylene HD (high density) with circular shape permitting excellent sliding features at low temperatures. The spreading disc with diameter 470 mm and max. spreading width 8m, is equipped with 6 blades realized in AISI 304 stainless steel for corrosion protection.

Hydraulic Driving systems

Throughout the vehicle hydraulic system the features comply with the European Standards EN15431.

Auxiliary engine Driving systems

Driving through the two-cylinders Diesel or Petrol engine, air cooled.

Salt missing sensor

Optical Salt missing sensor with visualization on the driver’s cabin display

Automatic demount system

P1: Unloading system with galvanized telescopic feet with crank. Higher front feet for easy loading on vehicles provided with side panels.

P3: Automatic unloading system for tipper, with front rollers and feet fitting into the spreader. Unloading can be made automatically from the driver’s cab.

P4: Hook unloading system complete with slide, protection guard for the vehicle platform and adjustable height rear rollers.

Pre-wetting system

The pre-wetting system is equipped with a volumetric pump directly coupled to the hydraulic motor, which is maintenance free. The Nitrile rotor does not need internal washing (only at the end of the season). Tanks constructed from sturdy and light-weight recyclable polyethylene. Solid/liquid ratio is regulated directly from the control box in the driver’s cabin.

Get to know more

Control unit Ecosat

Latest generation microprocessor control systems for all kind of spreaders, with maximum flexibility in programming and visualizing the different spreading parameters: width, asymmetry and dosage depending on the vehicle speed. Six different tools in all-in-one control box.

Ecosat has an integrated GSM/GPRS module (option) which enables operational data transmission. In case of bad coverage (e.g. tunnels) the data are logged and will be transmitted as soon as the connection is back.

Ecosat integrates (option) a multi-constellation GNSS receiver which supports GPS or GLONASS improving the localization performance in terms of accuracy, continuity, availability, and reliability.

The Ecosat stores daily operational reports and global counters which can be downloaded or printed via serial connection.

A serial connection between the infrared sensor and the Ecosat allows automatic changing of the spreading dosage based on the road temperature.

The Route-Replay is based on pre-defined geo-referenced spreading parameters settings uploaded on the EcoSat before the operation and used automatically during the mission relying on an enhanced positioning. The driver is guided by means of vocal and visual messages which show the road section already treated as well as the section that still has to be done. It is possible to exit from any pre-set route and re-entry at any point along the section.

On spreaders with electrical control of asymmetry, this function provides full control of the direction of spreading. The screen display varies according to the type of asymmetry: with or without feedback. 5 pre-set positions can be selected.

In this section of the working area, it is possible to monitor the level material in the tanks, the solid quantity in the hopper and also the fuel level (only for equipment with auxiliary engine).

The vehicle speed can be simulated from 5 to 90Km/h in steps of 5. This feature is useful when there is no tachometer connection, when the connection is damaged or when the spreader has to work while the vehicle is not moving.