Skip to main content
Teplex
Telescopic snow plough
The only plough worldwide capable of carrying out the work of two. Available in the lengths from 3000 mm up to 6960 mm.
With 2 ploughs you can cover a 3 lane highway, using only 2 instead of 3 trucks.This plough is designed to be very versatile, in fact, it can be extended during working in any width between the maximum and the minimum to fit frequent road width changes due to construction site or highways exit and so on.
Highway snow plough for clearing at high speed. The patented concept consists of a rigid plow part and one or two extendable elements. These can either be extended on the left and / or right, even while driving and allow a clearing width of up to 6030 mm at a 32 ° inclination.
The advantages are obvious - the TE series is always in the driver's field of vision, eliminating the need for a second operator for the usual side plow. This makes the system particularly safe and cost-efficient.
Get to know the Teplex snow ploughs
Suitable for clearing snow at high speed. It is made up of a fixed joint-free structure and one or two extending telescopic elements which, depending on the models, extend respectively one on the left and one on the right side, to vary the working width according to the different types of road surface. It allows to work both in the closed and extended position and in all intermediate positions. Equipped with hydraulic lifting-lowering, right-left steering and mobile elements. It can be used for clearing snow from motorways and airports.
Two trucks with minor modifications to the carrier vehicle, enable road management authorities to maintain a 3 lane highway.
Only one operator is able to control it.
If you can do snow clearance of a road with 1 plough instead of traditionally with 2 ploughs, it is not needed to think longer about it.
Key specifications
Length of scraper edge min3,000/max6,960 mm
Clearing width min2,600/max6,030 mm
Max.right-left clearing angle 32°
Right blade height 1,340 mm
Left blade height 1,240 mm
Maximum height from ground 400 mm
Attack angle 25°
Key features
By-pass valve
In the rotation hydraulic circuit, it ensures an effective shock absorption against lateral impacts.
Quick attachment plate to vehicle
Available according to the standards EU15432 size F1 or F2, DIN 76060, SETRA
Central sliding shoe
In cast iron or Combi, it is necessary when Combi scaping edges are used. It limits the load on the center scraping edge, also in case of rough roads.
Right telescopic element
Hydraulically controlled, it can be extended to the right; it allows you to work both in closed and elongated position and in every intermediate position.
Left telescopic element
Hydraulically controlled, it can be extended to the left; it allows you to work both in a closed and elongated position and in every intermediate position.
Self-adjustable support wheels
On request, preloaded with the automatic working field, they run smoothly over the ground and are suitable when working at high speed or when rubber or plastic scraping edges are used.
Blade curvature
The special profile, complete with bolted extension in sheet metal, perfectly discharges even large amounts of snow.
Rubber splash guard
It limits snow splashes on the vehicle windscreen.
Other snowploughs
Irox snow plough
Single-sector plough for heavy snowfall, with hydraulic controls for all types of roads and airports.
Polyx snow plough
Single section snow plough with polyethylene shield that, engineered for any environmental condition.
Unix snow plough
The revolutionary solution for snow removal that combines both working speed and safety.
Vipex snow plough
Universal plough, steel structure with variable positions, suitable for medium and heavy vehicles.
Discover Bucher Municipal
Find out why Bucher Municipal is the perfect partner for you.
Buy our products
and services
Providing products and services
around the world.
