One

Spreader for
medium and light trucks

Available in container sizes from 1.1 m³ up to 5.0 m³.

Bucher One metal belt spreader for light trucks, suitable for salt, sand or grit. The hopper, fully welded to prevent vibrations, is made in AISI 304 stainless steel, providing load capacity without any deformation.

Get to know the One spreader

Technology

Modern technology and feeding system

Metal belt: The feeding system is realized by an AISI 304 stainless steel chain with cross-bars. The chain is guided by toothed pinions that enables a constant traction maintaining a correct translation synchrony, without skidding.

Auger: The feeding system is realized by an auger with variable pitch turn. The bottom of the feeding system is realized by an anti-abrasive rubber to enable the passage of bigger lumps avoiding the auger blockage.

Reliability

Reliable and performant spreaders

The gritting machines of the One range are renowned for their excellent reliability, first-class service and attractive price-performance ratio. The excellent equipment finish and the use of tried-and-tested components are further proof of the great technical expertise built into our machines.

Performance

High quality and long lifetime

The high proportion of stainless steel ensures even the basic amenities for a long lifetime of the spreaders (Skid plates, spreader disc, feet sockets and all fasteners are in stainless steel). The device security cover is also made of stainless material.

Key specifications

Large choice of container sizes
Low container profile
Low container centre of gravity
Very short overhang of spreader unit
Standard-compliant spreading precision test
Special paintwork and many stainless steel components

Key features

Roller breaker

Metal belt

“Light” gritting system

“Premium” gritting system

Driving system

Wetting device (optional)

Roller breaker

A hydraulically driven roller breaker with stainless steel blades is installed on the exit side of the chain or belt feeding system. The roller breaker comes as an option with the auger feeding system and is placed lengthways. The roller breaker allows material to flow continuously from the hopper to the spreading unit, breaking down any lumps and preventing them from dropping in an uncontrolled way.

Metal belt

The feeding system is realized by metal belt an AISI 304 stainless steel with cross-bars. The chain is guided by toothed pinions that enable a constant traction, maintaining a correct translation synchrony, without skidding.

“Light” gritting system

“Standard” spreading unit with 470 mm disc and all metal parts made of AISI 304 stainless steel. With asymmetry that can be adjusted to five different positions, it can spread material up to a width of 8 m. When being moved, it can be easily lifted and turned over and a sensor ensures that the plate is automatically blocked when it is lifted.

“Premium” gritting system

Spreading unit with large disc (600 mm diameter) and all metal parts made of AISI 304 stainless steel. With asymmetry that can be electrically adjusted to five different positions, it can spread material up to a width of 12 m. The spreading disc has 6 AISI 304 stainless steel blades offering total lasting protection against corrosion. The blades have variable geometry to adjust the spreading of the material to the particle size. The chute leading to the spreading disc is made of HD polyethylene with a circular cross-section, cast moulded to allow the salt to flow at low temperatures. When being moved, the entire unit can be easily lifted and turned over and a safety sensor ensures that the plate is automatically blocked when it is lifted.

Hydraulic Driving systems

hydraulic system and compliant with the EN15431 European standard.

Auxiliary engine Driving systems (opt)

Driven by a 2-cylinder liquid-cooled diesel engine.

Bucher One Auxiliary engine Driving systems

Wetting device (opt)

The wetting device has a volumetric pump directly flanged to the hydraulic motor which is maintenance free. The nitrile rotor only requires internal washing at the end of the season. The side tanks are made of sturdy, light-weight rotomoulded polyethylene which is completely recyclable. The solid/liquid ratio is electronically controlled from the control panel in the driver’s cab.

Get to know more

Control unit EcoTron

The EcoTron control box unit is characterized by a compact dimensions and high-resolution graphics display. The EcoTron performs sensor-based and monitoring of distance-dependent auger conveyor speeds and pump speeds, and also saves all relevant working data. A serial USB interface port is available for easy exporting of data.